The Fyne Audio F1-12S combines a 300 mm IsoFlare driver with a 75 mm titanium compression tweeter. Its twin-cavity floorstanding cabinet sits on a substantial machined aluminium plinth housing the BassTrax diffuser, with controls for high-frequency energy and presence.
| Sale unit | Pair (2 speakers) |
|---|---|
| Included finish options | Piano Gloss Walnut |
| Specification basis | Driver counts, dimensions and Net Weight - Each below refer to one speaker. One sale contains a pair of speakers. |
| System Type | 2 way, downwards firing port, with BassTrax Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 20 - 350 |
| Peak power handling (Watt) | 600 |
| Continuous power handling (Watt RMS) | 175 |
| Sensitivity (2.83 Volt @ 1m) | 96dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 24Hz - 26kHz |
| Drive unit complement | 1 x 300mm IsoFlare point source driver with FyneFlute surround, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system |
| Crossover frequency | 750Hz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated |
| System adjustments | High frequency energy (750Hz - 26kHz) +/-3dB Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 1350 x 450 x 680mm (53.2” x 17.7 x 28.6”) |
| Net Weight - Each | 72kg |
| Finishes | Piano Gloss Walnut |
| S-Trax Position (from cabinet front edge) | 133mm (5.2") |
| SuperTrax Position (from cabinet front edge) | 109mm (4.3") |
Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All product weights displayed are net weight. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.