The Fyne Audio F701SP combines a 200 mm IsoFlare driver with an upgraded crossover in a UK-built stand-mount cabinet. BassTrax porting, premium internal components and cryogenic treatment support a stereo system designed around precise imaging and controlled low-frequency reproduction.
| Sale unit | Pair (2 speakers) |
|---|---|
| Included finish options | Piano Gloss Black; Natural Walnut; Piano Gloss Walnut; Piano Gloss White |
| Specification basis | Driver counts, dimensions and Net Weight - Each below refer to one speaker. One sale contains a pair of speakers. |
| System Type | 2 way, downwards firing port with BassTrax Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 30 - 180 |
| Peak power handling (Watt) | 360 |
| Continuous power handling (Watt RMS) | 90 |
| Sensitivity (2.83 Volt @ 1m) | 90dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 35Hz - 34kHz |
| Drive unit complement | 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute™ surround with 25mm magnesium dome compression tweeter, ferrite magnet system |
| Crossover frequency | 1.8kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenic Treatment. |
| Dimensions - HxWxD | 465 x 278 x 393mm (18.3 x 10.9 x 15.5”) |
| Net Weight - Each | 14.0kg (30.9lbs) |
| Finishes | Piano Gloss Walnut / Piano Gloss Black / Piano Gloss White / Natural Walnut |
| S-Trax Position (from cabinet front edge) | 63mm (2.5") |
| SuperTrax Position (from cabinet front edge) | 39mm (1.5") |
Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All product weights displayed are net weight. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.