The Fyne Audio Vintage Classic Gold VIII SP combines a 200 mm IsoFlare driver and magnesium compression tweeter in walnut-veneered birch-ply cabinetry. BassTrax porting and response controls support room integration, with gold accents completing its traditional floorstanding appearance.
| Sale unit | Pair (2 speakers) |
|---|---|
| Included finish options | Walnut |
| Specification basis | Driver counts, dimensions and Net Weight - Each below refer to one speaker. One sale contains a pair of speakers. |
| System Type | 2 way, downwards firing port, twin cavity, BassTrax™ Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 30 - 200 |
| Continuous power handling (Watt RMS) | 100 |
| Sensitivity (2.83 Volt @ 1m) | 91dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 30Hz - 34kHz |
| Drive unit complement | 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system. |
| Crossover frequency | 1.8kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass, Full Cryo Treatment |
| System adjustments | High frequency energy (1.8kHz – 34kHz) +/- 3dB, Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 873 x 380 x 300mm (34.4 x 15.0 x 11.8”) |
| Net Weight - Each | 26.3kg |
| Finishes | Walnut |
| Cabinet Construction | High density birch ply with extensive internal bracing |
| S-Trax Position (from cabinet front edge) | 79mm (3.1") |
| SuperTrax Position (from cabinet front edge) | 55mm (2.2") |
Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All product weights displayed are net weight. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.