The Fyne Audio Vintage Classic Gold XV SP combines a 380 mm IsoFlare driver with a titanium compression tweeter in a substantial birch-ply cabinet. Twin-cavity BassTrax porting, response controls and walnut veneer with gold accents complete this large floorstanding design.
| Sale unit | Pair (2 speakers) |
|---|---|
| Included finish options | Walnut |
| Specification basis | Driver counts, dimensions and Net Weight - Each below refer to one speaker. One sale contains a pair of speakers. |
| System Type | 2 way, downwards firing port, twin cavity, BassTrax Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 20- 400 |
| Continuous power handling (Watt RMS) | 200 |
| Sensitivity (2.83 Volt @ 1m) | 97dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 23Hz - 26kHz |
| Drive unit complement | 1 x 380mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 75mm titanium dome compression tweeter, neodymium magnet system. |
| Crossover frequency | 750Hz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenic Treatment |
| System adjustments | High frequency energy (750Hz - 26kHz) +/- 3dB Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 1052 x 650 x 537mm (41.4 x 25.6 x 21.1") |
| Net Weight - Each | 71kg |
| Finishes | Walnut |
| Cabinet Construction | High density birch ply with extensive internal bracing |
| S-Trax Position (from cabinet front edge) | 142mm (5.6") |
| SuperTrax Position (from cabinet front edge) | 118mm (4.6") |
Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All product weights displayed are net weight. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.