Genelec 4410A Smart IP Installation Speaker
Product Description
The Genelec 4410A brings Smart IP networked audio to a professional installation. A single network connection carries audio, power and management, simplifying system wiring and control. It integrates with Genelec Smart IP tools for commissioning and adjustment. This listing supplies one unit; network equipment is not included.
Supplied Configuration
One unit.
Specifications
Frequency Response
74 Hz - 20 kHz (± 2.5 dB)
Low cutoff -6dB
67 Hz
High cutoff -6dB
40 kHz
SPL
Peak SPL
≥100 dB
Maximum peak acoustic output per unit in a listening room with music material, at 1 m, using PoE+ power.
Short term max SPL
≥96 dB
Maximum short-term sine wave output on axis in half space, average 100 Hz to 3 kHz, at 1 m, using PoE+ power.
Long term max SPL
≥91 dB
Maximum long-term RMS acoustic output in same conditions with IEC-weighted noise, at 1 m using PoE+ power (limited by driver unit protection circuit and the PoE power supply being used).
Self-generated noise
Self-generated noise
≤5 dB
Self generated noise level in free field at 1 m on axis (A-weighted).
Weight
Weight1.5 kg (3.3 lb)
Dimensions
Height
181 mm
Width
121 mm
Depth
115 mm
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Cone
Diameter
76 mm
Driver type
Metal dome
Diameter
19 mm
Directivity
Harmonic distortion
> 200 Hz ≤0.5 %
Amplifiers
18 W Class D
18 W Class D
Mains voltage
PoE+/PoE
Power consumption
ISS Active
≤3 W
Idle
≤4 W
Full output
30 W
Connectors
Input
Ethernet (Power over Ethernet and Audio over IP)