Genelec 8380A SAM Main Monitor
Product Description
A Genelec Smart Active Monitor for accurate professional listening and mix decisions. The 8380A combines active amplification with digital signal processing and GLM room-calibration support to help adapt monitoring to the listening space. Its detailed specifications and connections are listed below. Supplied as one monitor.
Supplied Configuration
One unit.
Specifications
Frequency Response
38 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
29 Hz
High cutoff -6dB
43 kHz
SPL
Peak SPL
≥124 dB
Maximum peak acoustic output per pair in a listening room with musical material @ 2 m.
Short term max SPL
≥122 dB
Maximum short term sine wave acoustic output on axis in half space, averaged from 100Hz to 3 kHz @ 1 m.
Long term max SPL
≥115 dB
Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) @ 1 m.
Self-generated noise
Self-generated noise
≤0 dB SPL
Self generated noise level in free space at 1 m on axis (A-weighted).
Weight
Weight54 kg (119.0 lb)
Dimensions
Height
810 mm
Width
480 mm
Depth
420 mm
Enclosure
Enclosure material
MDF
Enclosure type
Reflex port
Drivers
Driver type
Cone
8380A bass driver cone
Diameter
380 mm
Driver type
Coaxial
8380A Midrange Driver (coaxial cone)
Diameter
130 mm
Driver type
Coaxial
8380A Treble Driver (coaxial metal dome)
Diameter
25 mm
Directivity
Harmonic distortion
50...200 Hz ≤1 %
> 200 Hz ≤0.5 %
Amplifiers
500 W Class D
250 W Class D
200 W Class AB
Mains voltage
100-240 VAC 50/60Hz
Power consumption
ISS Active
≤0.5 W
Idle
≤21 W
Full output
750 W
Connectors
Input
Analog signal input connector XLR female, balanced 10 kOhm.
Input
Digital signal input connector XLR female 110 Ohm
Output
Digital signal output / Thru connector XLR male 110 Ohm
2 x Control
Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.
Crossover
Bass/Mid
470 Hz
Mid/Treble
2500 Hz