The McIntosh MA9500 combines 300-watt-per-channel stereo amplification with seventeen analogue and digital inputs. Its DA2 digital module handles connected digital sources, while an eight-band analogue equaliser, Autoformer outputs and protection circuits support system setup and speaker operation.
| FTC Power Output Rating | 300 W |
|---|---|
| Power Output per Channel | 300 W into 2, 4, or 8 ohms |
| Number of Channels | 2 |
| Rated Power Band | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.005% |
| Dynamic Headroom | 2.8dB |
| Frequency Response +0,-0.5dB | 20Hz to 20kHz |
| Frequency Response, +0, -3dB | 10Hz to 100kHz |
| Sensitivity (Phono) | Moving Coil: 0.30mV Moving Magnet: 3.0mV |
| Sensitivity High Level (Balanced / Unbalanced) | 0.6V/0.3V |
| Sensitivity (Power Amp input) | 1.7V |
| Signal To Noise Ratio (Phono) | Moving Coil: 82dB Moving Magnet: 84dB |
| Signal To Noise Ratio (High Level) | 98dB |
| Signal To Noise Ratio (Power Amp input) | 114dB |
| Input Impedance (Balanced / Unbalanced) | 10K/22K |
| Damping Factor | >40 |
| Maximum Output | 16V Balanced 8V Unbalanced |
| Balanced Input | 2 |
|---|---|
| Unbalanced Input | 6 |
| Phono Input | 1 Moving Coil (adjustable loading) 1 Moving Magnet (adjustable loading) |
| Upgradeable Digital Audio Module | Yes: DA2 |
| Digital Coaxial Input | 2 |
| Digital Optical Input | 2 |
| Digital MCT Input | 1 |
| Digital USB Input | 1 |
| HDMI (ARC) Input | 1 |
| Balanced Variable Output | 1 |
| Unbalanced Fixed Output | 1 |
| Unbalanced Variable Output | 1 |
| Headphone Output | 1/4" High Drive with Headphone Crossfeed Director (HXD®) |
| Home Theater PassThru | Yes |
| Unbalanced Analog Connector Type | Premium gold-plated solid brass |
| Speaker Binding Post Type | Patented Solid Cinch™ Speaker Binding Posts |
| Service Port | 1 |
| Digital-to-Analog Converter (DAC) Type | 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced |
|---|---|
| Digital Coaxial Input Sample Rate | 24-bit/44.1kHz to 192kHz |
| Digital Optical Input Sample Rate | 24-bit/44.1kHz to 192kHz |
| Digital MCT Input Sample Rate | 16-bit/44.1kHz (CD) DSD64 (SACD) |
| Digital USB Input Sample Rate | 32-bit/44.1kHz to 384kHz (PCM) DSD64, DSD128, DSD256, DSD512, DXD352.8kHz, DXD384kHz |
| Tone Controls | 8-Band |
|---|---|
| Tone Bypass and Input Assign | Yes |
| RS232 Control Inputs | Yes |
| Power Control Outputs | 1 Main, 2 Trigger |
| Rear Panel Data Ports | 4 |
| Rear Panel IR Sensor Inputs | Yes |
| Input Level Match | Yes |
| Vacuum Tube or Solid State | Solid State |
|---|---|
| Output Type | Autoformer™ |
| Output Meters | Yes |
| Dual Layer Chassis | Yes |
| Chassis Finish | Polished stainless steel & black painted steel |
| McIntosh Monogrammed Heatsinks™ | Yes |
| Power Requirement | 120V, 50/60Hz, 6.6A |
| Standby Power Requirement | <0.25 Watts |
| Unit Dimensions (W x H x D) | 17-1/2” (44.5cm) x 9-7/16” (24 cm) x 19-3/4” (50.2cm) |
|---|---|
| Unit Weight | 101 lbs (45.8kg) |
| Shipping Weight | 134 lbs (60.8kg) |