The Michi X5 Series 2 is a stereo integrated amplifier with Class AB output rated at 350 watts per channel into 8 ohms or 600 watts into 4 ohms. Two shielded toroidal transformers form its linear power supply.
| Dimensions (W × H × D) | 485 x 195 x 452mm 19" × 7 5/8" × 17 3/4" |
|---|---|
| Front Panel Height | 177 mm (7") |
| Power Consumption | 850W |
| Standby Power Consumption | <0.5W |
| Net Weight | 43.8kg (96.56 lbs.) |
| BTU Rating | 2194 BTU/h |
| Continuous Power Output | 600W/Ch (4Ω) 350W/Ch (8Ω) |
| Total Harmonic Distortion (THD) | <0.009% |
| Frequency Response | Line Level Inputs: 10Hz - 100kHz (+0 dB, -0.6 dB) Digital Inputs: 20Hz - 20kHz (0 ± 0.4 dB) Phono Input: 20Hz - 20kHz (+0 dB, -0.2 dB) |
| S/N Ratio | (IHF "A" Weighted) Line Level Inputs: 102dB Digital Inputs: 102dB Phono Input: 80dB |
| Intermodulation Distortion | (60Hz:7kHz, 4:1) <0.03% |
|---|---|
| Damping Factor | (20 Hz - 20kHz, 8 ohms) 350 |
| Channel Separation | >65dB |
| Input Sensitivity | Line Level Inputs (RCA): 380mV Line Level Inputs (XLR): 580mV Phono Input (MM): 5.7mV Phono Input (MC): 570 uV |
| Input Impedance | Line Level Inputs (RCA): 100kΩ Line Level Inputs (XLR): 100kΩ Digital Inputs: 75Ω Phono Input (MM): 47kΩ Phono Input (MC): 100Ω |
| Input Overload | Line Level Inputs (RCA): 12.5V Line Level Inputs (XLR): 12.5V Phono Input (MM): 197mV Phono Input (MC): 19mV |
| Preout Level | 1V |
| Output Impedance | 470Ω |
| Tone Controls | ±10dB at 100Hz / 10kHz |
| Coax/Optical Digital Input Signals | SPDIF LPCM (Up to 24-bit/192kHz) |
| PC-USB | USB Audio Class 1 (up to 24-bit/96kHz) USB Audio Class 2 (up to 32-bit/384kHz) DSD and DoP support MQA and MQA Studio support Roon Tested |