The MoFi Electronics x Fender American Vintage + M combines Fender's iconic three-color Sunburst alder-wood plinth with MoFi's precision analogue engineering and comes factory-fitted with the MoFi MasterTracker MM cartridge. It features a 10-inch Ultra tonearm, electronically controlled belt drive, 33⅓/45 RPM operation, a 6.8 lb Delrin platter, hardened-steel inverted bearing and HRS-designed anti-vibration feet. The result is a complete analogue playback platform that pairs the turntable's mechanical precision with a high-performance moving-magnet cartridge.
| Drive Type | Belt Drive |
|---|---|
| Motor | 300 RPM AC Synchronous |
| Speed Control | Electronic |
| Playback Speeds | 33⅓ RPM / 45 RPM |
| Speed Selection | Push-Button |
| Power Consumption | < 5 W |
A 6.8 lb (3.08 kg) Delrin platter provides substantial rotational mass. The material's mechanical properties create an effective interface with the vinyl record, helping control unwanted vibration and maintain a stable tracking environment for the stylus.
| Material | Delrin |
|---|---|
| Thickness | 1.3 Inches |
| Weight | 3.08 kg / 6.8 lb |
The included 10-inch Ultra tonearm uses a straight aluminium armtube and high-quality gimbaled bearings. Its low-friction vertical and horizontal movement is designed to allow the cartridge to follow the record groove accurately. Cardas Audio wiring runs from the headshell connections through to the gold-plated RCA connectors.
| Tonearm Type | 10-Inch Straight Aluminium |
|---|---|
| Bearing | Gimbaled |
| Overhang | 18 mm / 0.71 Inch |
| Offset Angle | 22.8° ± 2° Adjustable |
| Cartridge Weight Range | 5–10 g |
| Internal Wiring | Cardas Audio |
| Output Connectors | Gold-Plated RCA |
The MasterTracker is a dual-magnet moving-magnet stereo cartridge designed around MoFi's V-Twin generator concept. Its two low-mass magnets are arranged in a V formation parallel to the record grooves, while the Micro-Line stylus is designed to trace the groove walls with high precision. A damped billet-aluminium body helps control cartridge resonance.
| Cartridge Type | Dual Magnet (MM) Stereo |
|---|---|
| Generator | V-Twin Dual Magnet |
| Stylus | Micro-Line |
| Cantilever | Tapered Aluminium |
| Output Voltage | 3 mV |
| Frequency Response | 20 Hz – 25 kHz |
| Cartridge Weight | 9.7 g |
| Tracking Force | 1.8–2.2 g |
| Impedance | 47 kOhms |
| Recommended Capacitance | 100 pF |
| Static Compliance | 40 × 10-6/dyne |
| Dynamic Compliance | 10 × 10-6/dyne |
| Channel Separation | 27 dB at 1 kHz |
| Channel Balance | 1.0 dB at 1 kHz |
| Coils | Ohno Continuous Cast Copper |
| Body | Damped Billet Aluminium |
The MasterTracker weighs 9.7 g, placing it within the American Vintage Ultra tonearm's specified 5–10 g cartridge range. As a 3 mV MM cartridge, it is designed for connection to a suitable MM phono input or an external phono stage configured for moving-magnet cartridges.
| Built-In Phono Stage | No |
|---|---|
| Included Cartridge | MoFi MasterTracker MM |
| Cartridge Type | Moving Magnet (MM) |
| Output | 3 mV |
| Required Phono Input | MM-Compatible PHONO Input |
| External MM Phono Stage | Compatible |
| Line Input Only | External MM Phono Stage Required |
The plinth uses real alder wood, a material strongly associated with Fender instruments. Its hand-finished three-color Sunburst treatment directly references the finish used on classic Fender guitars. The plinth is engineered to provide a rigid and low-resonance foundation for the platter and tonearm.
The hardened-steel inverted bearing combines steel, bronze and sapphire components to provide smooth and quiet platter rotation. HRS-designed anti-vibration feet isolate the turntable from external vibration, helping prevent unwanted energy from reaching the stylus.
A hinged smoked-amber acrylic dust cover is included to protect the turntable's playing components when not in use.
| Dimensions | 20.75 × 6 × 15.5 Inches |
|---|---|
| Dimensions in cm | 52.7 × 15.2 × 39.4 cm |
| Turntable Weight | 11.57 kg / 25.5 lb |
| Platter Weight | 3.08 kg / 6.8 lb |
| Cartridge Weight | 9.7 g |
| Brand | MoFi Electronics x Fender |
|---|---|
| Model | American Vintage + M |
| Included Cartridge | MoFi MasterTracker MM |
| Drive System | Belt Drive |
| Motor | 300 RPM AC Synchronous |
| Speeds | 33⅓ / 45 RPM |
| Speed Control | Electronic Push-Button |
| Platter | Delrin |
| Platter Thickness | 1.3 Inches |
| Platter Weight | 3.08 kg / 6.8 lb |
| Tonearm | 10-Inch Straight Aluminium |
| Tonearm Bearing | Gimbaled |
| Cartridge Range | 5–10 g |
| Cartridge Type | Dual Magnet MM Stereo |
| Cartridge Stylus | Micro-Line |
| Cartridge Output | 3 mV |
| Cartridge Weight | 9.7 g |
| Tracking Force | 1.8–2.2 g |
| Bearing System | Hardened-Steel Inverted Bearing |
| Internal Wiring | Cardas Audio |
| Isolation | HRS Anti-Vibration Feet |
| Plinth | Real Alder Wood |
| Finish | Fender Three-Color Sunburst |
| Dust Cover | Hinged Smoked-Amber Acrylic |
| Built-In Phono Stage | No |
| Power Consumption | < 5 W |
| Dimensions | 20.75 × 6 × 15.5 Inches |
| Weight | 11.57 kg / 25.5 lb |
| Manufacturing | USA |