{"title":"Teac","description":null,"products":[{"product_id":"teac-tn-3b-se","title":"TEAC TN-3B-SE Turntable","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eTEAC TN-3B-SE Belt-Drive Turntable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEAC TN-3B-SE\u003c\/strong\u003e is a manual belt-drive turntable designed for high-quality vinyl playback. It features a SAEC-designed knife-edge, pivot-point tonearm, aluminium die-cast platter, rigid high-density MDF plinth and shock-absorbing insulating feet. A built-in MM-compatible PHONO EQ amplifier allows the turntable to connect directly to a line-level input, while the included Audio-Technica AT-VM95E cartridge provides a ready-to-use playback solution.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual belt-drive turntable.\u003c\/li\u003e\n\u003cli\u003e33⅓ and 45 RPM playback.\u003c\/li\u003e\n\u003cli\u003eSAEC-designed knife-edge, pivot-point tonearm.\u003c\/li\u003e\n\u003cli\u003e30 cm aluminium die-cast platter.\u003c\/li\u003e\n\u003cli\u003ePre-installed Audio-Technica AT-VM95E MM cartridge.\u003c\/li\u003e\n\u003cli\u003eBuilt-in MM PHONO EQ amplifier.\u003c\/li\u003e\n\u003cli\u003eSwitchable PHONO \/ LINE output.\u003c\/li\u003e\n\u003cli\u003eHigh-density MDF plinth with multi-layer lacquer finish.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing aluminium-and-rubber insulating feet.\u003c\/li\u003e\n\u003cli\u003eAnti-skating adjustment.\u003c\/li\u003e\n\u003cli\u003eGold-plated RCA output connectors.\u003c\/li\u003e\n\u003cli\u003eGround terminal for phono connection.\u003c\/li\u003e\n\u003cli\u003eHoneycomb-patterned bottom panel for improved rigidity and vibration control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTurntable \u0026amp; Drive System\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive System\u003c\/th\u003e\n\u003ctd\u003eBelt Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003eDC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeeds\u003c\/th\u003e\n\u003ctd\u003e33⅓ RPM \/ 45 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWow \u0026amp; Flutter\u003c\/th\u003e\n\u003ctd\u003e0.1% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e67 dB or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePlatter\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium Die-Cast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e30 cm \/ 12 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eTonearm\u003c\/h3\u003e\n\u003cp\u003eThe TN-3B-SE uses a \u003cstrong\u003estatic-balanced S-shaped tonearm\u003c\/strong\u003e with knife-edge, pivot-point bearings developed with SAEC. The design provides controlled vertical movement and accurate cartridge tracking.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStatic-Balanced S-Shaped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffective Length\u003c\/th\u003e\n\u003ctd\u003e223 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force Range\u003c\/th\u003e\n\u003ctd\u003e0–5.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Cartridge Weight\u003c\/th\u003e\n\u003ctd\u003e3–12 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Weight Including Headshell\u003c\/th\u003e\n\u003ctd\u003e14–23 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnti-Skating\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eAudio-Technica AT-VM95E Cartridge\u003c\/h3\u003e\n\u003cp\u003eThe turntable comes with an \u003cstrong\u003eAudio-Technica AT-VM95E\u003c\/strong\u003e moving-magnet cartridge pre-installed on the headshell. It provides a 4.0 mV output and is designed for a standard MM-compatible phono input.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eMM \/ VM Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAudio-Technica AT-VM95E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Voltage\u003c\/th\u003e\n\u003ctd\u003e4.0 mV at 1 kHz, 5 cm\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force\u003c\/th\u003e\n\u003ctd\u003e1.8–2.2 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Tracking Force\u003c\/th\u003e\n\u003ctd\u003e2.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Weight\u003c\/th\u003e\n\u003ctd\u003e6.1 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeadshell Weight\u003c\/th\u003e\n\u003ctd\u003e11 g including screws, nuts and wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement Stylus\u003c\/th\u003e\n\u003ctd\u003eAT-VMN95E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eBuilt-In PHONO EQ\u003c\/h3\u003e\n\u003cp\u003eThe integrated \u003cstrong\u003eMM PHONO EQ amplifier\u003c\/strong\u003e allows the TN-3B-SE to be used with either a dedicated PHONO input or a standard line-level input. The PHONO\/LINE output mode can be selected according to the connected amplifier or powered speaker.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO EQ\u003c\/th\u003e\n\u003ctd\u003eBuilt-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Cartridge\u003c\/th\u003e\n\u003ctd\u003eMM \/ VM Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO Output\u003c\/th\u003e\n\u003ctd\u003e4.0 mV at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLINE Output\u003c\/th\u003e\n\u003ctd\u003e224 mV (-13 dBV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Connector\u003c\/th\u003e\n\u003ctd\u003eGold-Plated RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Selection\u003c\/th\u003e\n\u003ctd\u003ePHONO \/ LINE Switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePlinth \u0026amp; Vibration Control\u003c\/h3\u003e\n\u003cp\u003eThe rigid, high-density MDF plinth is finished with a multi-layer lacquer coating. Its honeycomb-patterned bottom panel is designed to increase rigidity while reducing unwanted vibration. Machined aluminium feet combined with rubber cushioning provide additional isolation from external vibration and acoustic feedback.\u003c\/p\u003e\n\u003ch3\u003ePower \u0026amp; Connections\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Supply\u003c\/th\u003e\n\u003ctd\u003eAC 100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption\u003c\/th\u003e\n\u003ctd\u003e1.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandby Consumption\u003c\/th\u003e\n\u003ctd\u003e0.5 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio Output\u003c\/th\u003e\n\u003ctd\u003eRCA × 1 Pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGround Terminal\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e420 mm \/ 42 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e117 mm \/ 11.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e356 mm \/ 35.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × H × D)\u003c\/th\u003e\n\u003ctd\u003e420 × 117 × 356 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Weight\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e5.0 kg \/ 11.0 lb\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFelt Mat\u003c\/li\u003e\n\u003cli\u003e45 RPM Adapter\u003c\/li\u003e\n\u003cli\u003eCounterweight\u003c\/li\u003e\n\u003cli\u003eHeadshell with AT-VM95E Cartridge Installed\u003c\/li\u003e\n\u003cli\u003eAluminium Die-Cast Platter\u003c\/li\u003e\n\u003cli\u003eDust Cover\u003c\/li\u003e\n\u003cli\u003eDust Cover Hinges × 2\u003c\/li\u003e\n\u003cli\u003eRCA Audio Cable with Ground Terminal\u003c\/li\u003e\n\u003cli\u003eAC Adapter\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TEAC","offers":[{"title":"RED","offer_id":42982745997430,"sku":null,"price":59745.76,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1451\/files\/tn-3b_main.jpg?v=1787687901"},{"product_id":"teac-tn-400bt-se-turntable-with-bluetooth","title":"TEAC TN-400BT-SE Turntable","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eTEAC TN-400BT-SE Bluetooth Analog Turntable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEAC TN-400BT-SE\u003c\/strong\u003e is a manual belt-drive analog turntable designed for versatile vinyl playback through both conventional wired connections and Bluetooth. It features a built-in phono equalizer, a high-quality aluminium die-cast platter, an S-shaped static-balanced tonearm and a factory-installed Audio-Technica AT95E VM-type cartridge. Its Bluetooth transmitter supports wireless playback to compatible Bluetooth speakers and headphones.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual belt-drive analog turntable.\u003c\/li\u003e\n\u003cli\u003e33⅓, 45 and 78 RPM playback speeds.\u003c\/li\u003e\n\u003cli\u003eBuilt-in MM-compatible phono equalizer.\u003c\/li\u003e\n\u003cli\u003eBluetooth transmitter for wireless vinyl playback.\u003c\/li\u003e\n\u003cli\u003eQualcomm aptX audio support.\u003c\/li\u003e\n\u003cli\u003e30 cm aluminium die-cast platter.\u003c\/li\u003e\n\u003cli\u003eS-shaped static-balanced tonearm.\u003c\/li\u003e\n\u003cli\u003eAdjustable tracking force and anti-skating.\u003c\/li\u003e\n\u003cli\u003eFactory-installed Audio-Technica AT95E VM-type cartridge.\u003c\/li\u003e\n\u003cli\u003eHigh-density cabinet construction for improved rigidity and vibration control.\u003c\/li\u003e\n\u003cli\u003eRCA analogue output with grounding terminal.\u003c\/li\u003e\n\u003cli\u003eRemovable dust cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrive System\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive Method\u003c\/th\u003e\n\u003ctd\u003eBelt Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003eDC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlayback Speeds\u003c\/th\u003e\n\u003ctd\u003e33⅓ RPM \/ 45 RPM \/ 78 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRotation Speed Variation\u003c\/th\u003e\n\u003ctd\u003e±2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWow \u0026amp; Flutter\u003c\/th\u003e\n\u003ctd\u003e0.2% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e67 dB or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePlatter\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium Die-Cast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e30 cm \/ 12 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe aluminium die-cast platter provides a rigid and stable platform for record playback. The belt-drive arrangement separates the platter from direct motor vibration to help maintain smooth rotation.\u003c\/p\u003e\n\u003ch3\u003eTonearm\u003c\/h3\u003e\n\u003cp\u003eThe TN-400BT-SE uses a \u003cstrong\u003estatic-balanced S-shaped tonearm\u003c\/strong\u003e with adjustable tracking force and anti-skating. The tonearm is designed to provide stable cartridge tracking across the record surface.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTonearm Type\u003c\/th\u003e\n\u003ctd\u003eStatic-Balanced S-Shaped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffective Tonearm Length\u003c\/th\u003e\n\u003ctd\u003e223 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force Range\u003c\/th\u003e\n\u003ctd\u003e0–5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcceptable Cartridge Weight\u003c\/th\u003e\n\u003ctd\u003e4.0–8.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnti-Skating\u003c\/th\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eAudio-Technica AT95E Cartridge\u003c\/h3\u003e\n\u003cp\u003eThe turntable is supplied with an \u003cstrong\u003eAudio-Technica AT95E\u003c\/strong\u003e VM-type dual-magnet stereo cartridge pre-installed. The VM design has characteristics equivalent to an MM cartridge and is suitable for the TN-400BT-SE's built-in phono equalizer.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Type\u003c\/th\u003e\n\u003ctd\u003eVM \/ MM-Equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAudio-Technica AT95E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Voltage\u003c\/th\u003e\n\u003ctd\u003e3.5 mV at 1 kHz, 5 cm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force\u003c\/th\u003e\n\u003ctd\u003e2.0 ± 0.5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Weight\u003c\/th\u003e\n\u003ctd\u003e5.7 ± 0.5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Headshell Weight\u003c\/th\u003e\n\u003ctd\u003e10 g including screws, nuts and wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement Stylus\u003c\/th\u003e\n\u003ctd\u003eAudio-Technica ATN95E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eBluetooth Wireless Transmission\u003c\/h3\u003e\n\u003cp\u003eThe built-in \u003cstrong\u003eBluetooth transmitter\u003c\/strong\u003e allows the TN-400BT-SE to wirelessly transmit audio from vinyl records to compatible Bluetooth speakers and headphones. The turntable functions as a Bluetooth transmitter and is not designed to receive Bluetooth audio from smartphones or other source devices.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBluetooth Version\u003c\/th\u003e\n\u003ctd\u003e5.2, Dual Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBluetooth Class\u003c\/th\u003e\n\u003ctd\u003eClass 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported Profile\u003c\/th\u003e\n\u003ctd\u003eA2DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported Codecs\u003c\/th\u003e\n\u003ctd\u003eSBC, AAC, Qualcomm aptX Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Stored Pairings\u003c\/th\u003e\n\u003ctd\u003e8 Devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eBluetooth Transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePhono Equalizer \u0026amp; Analogue Output\u003c\/h3\u003e\n\u003cp\u003eThe integrated \u003cstrong\u003ephono equalizer\u003c\/strong\u003e allows the TN-400BT-SE to be connected to an amplifier or powered speaker system with a standard line-level input. The unit also provides a direct phono-level output for systems equipped with a dedicated PHONO input.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePhono Equalizer\u003c\/th\u003e\n\u003ctd\u003eBuilt-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Type\u003c\/th\u003e\n\u003ctd\u003ePHONO EQ THRU \/ PHONO EQ ON\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO EQ THRU Output\u003c\/th\u003e\n\u003ctd\u003e3.5 mV at 1 kHz, 5 cm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO EQ ON Output\u003c\/th\u003e\n\u003ctd\u003e155 mV (-16 dBV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Connectors\u003c\/th\u003e\n\u003ctd\u003eRCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGround Terminal\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eCabinet \u0026amp; Vibration Control\u003c\/h3\u003e\n\u003cp\u003eThe TN-400BT-SE uses a rigid cabinet structure designed to provide a stable platform for the platter and tonearm. Its construction helps minimise unwanted vibration and resonance during record playback. The supplied dust cover can be removed when required.\u003c\/p\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Input\u003c\/th\u003e\n\u003ctd\u003eAC 100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Output\u003c\/th\u003e\n\u003ctd\u003eDC 12 V \/ 500 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption – Standby\u003c\/th\u003e\n\u003ctd\u003e0.5 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption – Operating\u003c\/th\u003e\n\u003ctd\u003e1.5 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e420 mm \/ 42 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e117 mm \/ 11.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e356 mm \/ 35.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e420 × 117 × 356 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Open\u003c\/th\u003e\n\u003ctd\u003e420 × 381 × 402 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Removed\u003c\/th\u003e\n\u003ctd\u003e420 × 102 × 356 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e4.9 kg\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFelt Mat\u003c\/li\u003e\n\u003cli\u003e45 RPM Adapter\u003c\/li\u003e\n\u003cli\u003eCounterweight\u003c\/li\u003e\n\u003cli\u003eHeadshell\u003c\/li\u003e\n\u003cli\u003eAudio-Technica AT95E VM-type Cartridge, Pre-installed\u003c\/li\u003e\n\u003cli\u003eAluminium Die-Cast Platter\u003c\/li\u003e\n\u003cli\u003eDust Cover\u003c\/li\u003e\n\u003cli\u003eDust Cover Hinges\u003c\/li\u003e\n\u003cli\u003eRCA Audio Cable with Grounding Terminal\u003c\/li\u003e\n\u003cli\u003eAC Adapter\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TEAC","offers":[{"title":"Default Title","offer_id":42012714532982,"sku":null,"price":70762.71,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1451\/files\/TN-400BT-SE.png?v=1739884591"},{"product_id":"teac-tn-4d-turntable-with-built-in-phono-stage","title":"TEAC TN-4D-SE Turntable","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eTEAC TN-4D-SE Direct-Drive Turntable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEAC TN-4D-SE\u003c\/strong\u003e is a precision direct-drive analog turntable featuring a newly developed brushless DC motor with feedback control for highly stable rotation. Its slim design incorporates a knife-edge, pivot-point tonearm bearing system developed in collaboration with SAEC, a die-cast aluminium platter and a factory-installed \u003cstrong\u003eSUMIKO Oyster MM cartridge\u003c\/strong\u003e. A built-in PHONO EQ amplifier provides convenient connection to both PHONO and LINE inputs.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-drive analog turntable with ultra-stable motor control.\u003c\/li\u003e\n\u003cli\u003eBrushless DC motor with computer-controlled feedback system.\u003c\/li\u003e\n\u003cli\u003eCrystal-locked speed stability with reduced cogging.\u003c\/li\u003e\n\u003cli\u003e33⅓ RPM and 45 RPM playback.\u003c\/li\u003e\n\u003cli\u003e30 cm aluminium die-cast platter.\u003c\/li\u003e\n\u003cli\u003eSAEC-developed knife-edge, pivot-point tonearm bearings.\u003c\/li\u003e\n\u003cli\u003eS-shaped static-balanced tonearm with universal headshell fitting.\u003c\/li\u003e\n\u003cli\u003eFactory-installed SUMIKO Oyster MM cartridge.\u003c\/li\u003e\n\u003cli\u003eBuilt-in high-quality MM PHONO EQ amplifier.\u003c\/li\u003e\n\u003cli\u003eSwitchable PHONO \/ LINE output.\u003c\/li\u003e\n\u003cli\u003eNJM8080 audiophile-grade op-amp used in the PHONO EQ stage.\u003c\/li\u003e\n\u003cli\u003eGold-plated, oxidation-resistant RCA output connectors.\u003c\/li\u003e\n\u003cli\u003eAdjustable anti-skating and stylus pressure.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing aluminium-and-rubber insulating feet.\u003c\/li\u003e\n\u003cli\u003eMulti-layer piano-black or natural walnut veneer finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDirect-Drive Motor\u003c\/h3\u003e\n\u003cp\u003eUnlike a belt-drive design, the TN-4D-SE connects the motor directly to the platter. Its newly developed \u003cstrong\u003ebrushless DC servo motor\u003c\/strong\u003e uses a feedback control system to maintain accurate rotational speed. The low-profile motor also allows TEAC to achieve a slim chassis design while maintaining stable platter rotation.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive Method\u003c\/th\u003e\n\u003ctd\u003eDirect Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003eBrushless DC Servo Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlayback Speeds\u003c\/th\u003e\n\u003ctd\u003e33⅓ RPM \/ 45 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWow \u0026amp; Flutter\u003c\/th\u003e\n\u003ctd\u003e0.1% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e67 dB or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eAluminium Die-Cast Platter\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e30 cm aluminium die-cast platter\u003c\/strong\u003e provides a rigid, high-inertia platform for stable record playback. Its combination with the direct-drive motor contributes to accurate speed regulation and smooth rotation.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium Die-Cast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e30 cm \/ 12 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSAEC-Developed Tonearm\u003c\/h3\u003e\n\u003cp\u003eThe TN-4D-SE uses an \u003cstrong\u003eS-shaped static-balanced tonearm\u003c\/strong\u003e incorporating a knife-edge, pivot-point bearing system developed with SAEC. The bearing design allows smooth vertical movement and precise stylus tracking. The universal headshell fitting also makes cartridge and headshell changes straightforward.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTonearm Type\u003c\/th\u003e\n\u003ctd\u003eS-Shaped, Static-Balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffective Length\u003c\/th\u003e\n\u003ctd\u003e223 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force Range\u003c\/th\u003e\n\u003ctd\u003e0–5.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Cartridge Weight\u003c\/th\u003e\n\u003ctd\u003e4.0–13.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Weight Including Headshell\u003c\/th\u003e\n\u003ctd\u003e14–23 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnti-Skating\u003c\/th\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSUMIKO Oyster MM Cartridge\u003c\/h3\u003e\n\u003cp\u003eThe turntable is supplied with a factory-installed \u003cstrong\u003eSUMIKO Oyster MM cartridge\u003c\/strong\u003e. The cartridge is mounted on the headshell and is designed to provide straightforward setup and compatibility with the TN-4D-SE's integrated MM PHONO EQ stage.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Type\u003c\/th\u003e\n\u003ctd\u003eMM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSUMIKO Oyster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Voltage\u003c\/th\u003e\n\u003ctd\u003e4.0 mV at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force Range\u003c\/th\u003e\n\u003ctd\u003e1.5–2.5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Tracking Force\u003c\/th\u003e\n\u003ctd\u003e2.3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Weight\u003c\/th\u003e\n\u003ctd\u003e5.3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement Stylus\u003c\/th\u003e\n\u003ctd\u003eSUMIKO Oyster Replacement Stylus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eBuilt-In PHONO EQ Amplifier\u003c\/h3\u003e\n\u003cp\u003eThe integrated \u003cstrong\u003ePHONO EQ amplifier\u003c\/strong\u003e uses an NJM8080 op-amp designed for high-quality audio applications. It raises the low-level cartridge signal to line level, allowing the turntable to connect directly to a standard line-level input. The output can also be used in direct PHONO mode with an external phono stage.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO EQ\u003c\/th\u003e\n\u003ctd\u003eBuilt-In, MM Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Selection\u003c\/th\u003e\n\u003ctd\u003ePHONO \/ LINE Switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO Output\u003c\/th\u003e\n\u003ctd\u003e4.0 mV at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLINE Output\u003c\/th\u003e\n\u003ctd\u003e224 mV (-13 dBV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Connectors\u003c\/th\u003e\n\u003ctd\u003eGold-Plated RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGround Terminal\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIsolation \u0026amp; Cabinet Construction\u003c\/h3\u003e\n\u003cp\u003eThe TN-4D-SE uses a low-profile cabinet with a multi-layer piano-black or natural walnut veneer finish. Its insulating feet combine a machined aluminium shell with a rubber cushion to absorb external vibration and help resist acoustic feedback.\u003c\/p\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Input\u003c\/th\u003e\n\u003ctd\u003eAC 100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Output\u003c\/th\u003e\n\u003ctd\u003eDC 24 V \/ 1500 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption\u003c\/th\u003e\n\u003ctd\u003e2 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandby Power\u003c\/th\u003e\n\u003ctd\u003e0.5 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e420 mm \/ 42 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e117 mm \/ 11.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e356 mm \/ 35.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e420 × 117 × 356 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Open\u003c\/th\u003e\n\u003ctd\u003e420 × 381 × 402 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Removed\u003c\/th\u003e\n\u003ctd\u003e420 × 102 × 356 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e6.1 kg\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFelt Mat\u003c\/li\u003e\n\u003cli\u003e45 RPM Adapter\u003c\/li\u003e\n\u003cli\u003eCounterweight\u003c\/li\u003e\n\u003cli\u003eHeadshell with SUMIKO Oyster Cartridge Installed\u003c\/li\u003e\n\u003cli\u003eAluminium Die-Cast Platter\u003c\/li\u003e\n\u003cli\u003eDust Cover\u003c\/li\u003e\n\u003cli\u003eDust Cover Hinges × 2\u003c\/li\u003e\n\u003cli\u003eRCA Audio Cable with Ground Terminal\u003c\/li\u003e\n\u003cli\u003eAC Adapter\u003c\/li\u003e\n\u003cli\u003eOwner's Manual and Warranty Card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TEAC","offers":[{"title":"Default Title","offer_id":42012794945654,"sku":null,"price":116949.15,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1451\/files\/teac-tn-4d-se.jpg?v=1777021020"},{"product_id":"teac-tn-5bb-manual-belt-drive-turntable","title":"TEAC TN-5BB Turntable","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eTEAC TN-5BB Manual Belt-Drive Turntable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEAC TN-5BB\u003c\/strong\u003e is a high-performance manual belt-drive turntable designed for precise and stable analogue playback. It combines TEAC's PRS3 (Platter Rotation Sensing Servo System) with a 20 mm-thick acrylic platter, a hybrid multi-material chassis and a 9-inch S-shaped static-balanced tonearm with a knife-edge bearing system developed through the SAEC × TEAC collaboration. The turntable is supplied with a factory-installed \u003cstrong\u003eOrtofon 2M Red MM cartridge\u003c\/strong\u003e and provides both balanced XLR and unbalanced RCA phono outputs.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual belt-drive turntable with high-precision rotation control.\u003c\/li\u003e\n\u003cli\u003ePRS3 Platter Rotation Sensing Servo System.\u003c\/li\u003e\n\u003cli\u003e33⅓, 45 and 78 RPM playback speeds.\u003c\/li\u003e\n\u003cli\u003e20 mm-thick acrylic platter.\u003c\/li\u003e\n\u003cli\u003e9-inch S-shaped static-balanced tonearm.\u003c\/li\u003e\n\u003cli\u003eSAEC × TEAC knife-edge tonearm bearing system.\u003c\/li\u003e\n\u003cli\u003eAdjustable VTA with approximately 6 mm of height adjustment.\u003c\/li\u003e\n\u003cli\u003eFactory-installed Ortofon 2M Red MM cartridge.\u003c\/li\u003e\n\u003cli\u003ePowered tonearm lifter.\u003c\/li\u003e\n\u003cli\u003eAutomatic end-of-record arm lift using non-contact optical detection.\u003c\/li\u003e\n\u003cli\u003eAdjustable anti-skating.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced RCA phono outputs.\u003c\/li\u003e\n\u003cli\u003eHeight-adjustable machined-aluminium feet.\u003c\/li\u003e\n\u003cli\u003eHybrid chassis combining MDF, synthetic marble and washi paper damping layers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrecision Belt-Drive System\u003c\/h3\u003e\n\u003cp\u003eThe TN-5BB uses TEAC's \u003cstrong\u003ePRS3 Platter Rotation Sensing Servo System\u003c\/strong\u003e to continuously monitor platter rotation and maintain accurate speed. The belt-drive configuration separates the motor from the platter while the servo system helps compensate for rotational variation.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive Method\u003c\/th\u003e\n\u003ctd\u003eRotation-Detection-Type High-Precision Control Belt Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003eDC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlayback Speeds\u003c\/th\u003e\n\u003ctd\u003e33⅓ RPM \/ 45 RPM \/ 78 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed Control\u003c\/th\u003e\n\u003ctd\u003ePRS3 Platter Rotation Sensing Servo System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWow \u0026amp; Flutter\u003c\/th\u003e\n\u003ctd\u003e0.1% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eAcrylic Platter\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e20 mm-thick acrylic platter\u003c\/strong\u003e is used for its rigidity, flatness and internal damping characteristics. The 1.7 kg platter provides high rotational inertia and forms a stable interface with the record.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e30 cm \/ 12 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlatter Weight\u003c\/th\u003e\n\u003ctd\u003e1.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eHybrid Chassis \u0026amp; Vibration Control\u003c\/h3\u003e\n\u003cp\u003eThe TN-5BB uses a multi-material chassis designed to suppress unwanted vibration. A \u003cstrong\u003e36 mm MDF base\u003c\/strong\u003e is combined with a rigid \u003cstrong\u003e12 mm synthetic-marble top plate\u003c\/strong\u003e, with a washi-paper layer between the materials. The platter and tonearm are mounted on the synthetic-marble section, while the motor is isolated on the MDF base to reduce the transmission of motor vibration to the tonearm.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Material\u003c\/th\u003e\n\u003ctd\u003e36 mm MDF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop Plate\u003c\/th\u003e\n\u003ctd\u003e12 mm Synthetic Marble\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDamping Layer\u003c\/th\u003e\n\u003ctd\u003eJapanese Washi Paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCabinet Weight\u003c\/th\u003e\n\u003ctd\u003eApprox. 8.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSAEC × TEAC Tonearm\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e9-inch S-shaped tonearm\u003c\/strong\u003e incorporates a knife-edge bearing system developed through the SAEC × TEAC collaboration. The static-balanced design supports precise tracking, while the adjustable arm height allows the vertical tracking angle to be optimised for cartridges of different heights.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTonearm Type\u003c\/th\u003e\n\u003ctd\u003eStatic-Balanced S-Shaped Tonearm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffective Arm Length\u003c\/th\u003e\n\u003ctd\u003e223 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverhang\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable Cartridge Weight\u003c\/th\u003e\n\u003ctd\u003e4.0–13.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable Weight Including Headshell\u003c\/th\u003e\n\u003ctd\u003e14–23 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTA Adjustment\u003c\/th\u003e\n\u003ctd\u003eApproximately 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnti-Skating\u003c\/th\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eOrtofon 2M Red Cartridge\u003c\/h3\u003e\n\u003cp\u003eThe TN-5BB is supplied with an \u003cstrong\u003eOrtofon 2M Red MM cartridge\u003c\/strong\u003e pre-installed on the included headshell. The cartridge uses a bonded Elliptical diamond stylus and is designed to provide a balanced and detailed presentation from vinyl records.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Type\u003c\/th\u003e\n\u003ctd\u003eMM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eOrtofon 2M Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Voltage\u003c\/th\u003e\n\u003ctd\u003e5.5 mV at 1 kHz, 5 cm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Tracking Force\u003c\/th\u003e\n\u003ctd\u003e1.8 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Weight\u003c\/th\u003e\n\u003ctd\u003e7.2 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Headshell Weight\u003c\/th\u003e\n\u003ctd\u003e10 g including screws, nuts and wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement Stylus\u003c\/th\u003e\n\u003ctd\u003eOrtofon 2M Red Replacement Stylus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePowered Tonearm Lifter \u0026amp; Automatic Arm Lift\u003c\/h3\u003e\n\u003cp\u003eThe TN-5BB includes a \u003cstrong\u003epowered tonearm lifter\u003c\/strong\u003e for controlled arm raising and lowering. A non-contact optical sensor can automatically raise the tonearm when playback reaches the end of a record. The automatic lift function can be switched off when required.\u003c\/p\u003e\n\u003ch3\u003eBalanced \u0026amp; Unbalanced Outputs\u003c\/h3\u003e\n\u003cp\u003eThe TN-5BB provides both \u003cstrong\u003ebalanced XLR\u003c\/strong\u003e and \u003cstrong\u003eunbalanced RCA\u003c\/strong\u003e phono outputs. The balanced connection can be used with a compatible phono stage to help preserve the low-level cartridge signal over the connection.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBalanced Output\u003c\/th\u003e\n\u003ctd\u003eXLR × 1 Pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnbalanced Output\u003c\/th\u003e\n\u003ctd\u003eRCA × 1 Pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGround Terminal\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-In Phono Stage\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired Equipment\u003c\/th\u003e\n\u003ctd\u003eExternal Phono Stage or Amplifier with PHONO Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIsolation Feet\u003c\/h3\u003e\n\u003cp\u003eFour height-adjustable machined-aluminium feet provide mechanical isolation and allow the turntable to be levelled accurately. The adjustable construction helps maintain the correct platter and tonearm geometry.\u003c\/p\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Input\u003c\/th\u003e\n\u003ctd\u003eAC 100–240 V, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Output\u003c\/th\u003e\n\u003ctd\u003eDC 12 V \/ 1.0 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption\u003c\/th\u003e\n\u003ctd\u003e2.0 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandby Consumption\u003c\/th\u003e\n\u003ctd\u003e0.3 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e450 mm \/ 45 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e148 mm \/ 14.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e351 mm \/ 35.1 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Closed\u003c\/th\u003e\n\u003ctd\u003e450 × 148 × 351 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Open\u003c\/th\u003e\n\u003ctd\u003e450 × 420 × 410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions – Dust Cover Removed\u003c\/th\u003e\n\u003ctd\u003e450 × 135 × 351 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e10.5 kg \/ 23.25 lb\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOrtofon 2M Red MM Cartridge, Pre-installed\u003c\/li\u003e\n\u003cli\u003eCast-Aluminium Headshell\u003c\/li\u003e\n\u003cli\u003e45 RPM Adapter\u003c\/li\u003e\n\u003cli\u003eCounterweight\u003c\/li\u003e\n\u003cli\u003eAcrylic Platter\u003c\/li\u003e\n\u003cli\u003eFlat Drive Belt\u003c\/li\u003e\n\u003cli\u003ePulley Cover\u003c\/li\u003e\n\u003cli\u003eAcrylic Dust Cover\u003c\/li\u003e\n\u003cli\u003eDust Cover Hinges\u003c\/li\u003e\n\u003cli\u003eFoot Height Adjustment Washers\u003c\/li\u003e\n\u003cli\u003eTonearm Height Adjustment Hex Wrench\u003c\/li\u003e\n\u003cli\u003eTonearm Lifter Height Adjustment Hex Wrench\u003c\/li\u003e\n\u003cli\u003eRCA Audio Cable\u003c\/li\u003e\n\u003cli\u003eGround Wire\u003c\/li\u003e\n\u003cli\u003eAC Adapter\u003c\/li\u003e\n\u003cli\u003eCartridge Alignment Gauge\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TEAC","offers":[{"title":"Default Title","offer_id":42012837675126,"sku":null,"price":211864.41,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1451\/files\/TN-5BB.png?v=1739887342"},{"product_id":"teac-tn-3b-se-turntable-copy","title":"TEAC TN-280BT-SE Turntable","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eTEAC TN-280BT-SE Bluetooth Belt-Drive Turntable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEAC TN-280BT-SE\u003c\/strong\u003e is a two-speed manual belt-drive turntable designed for convenient vinyl playback with both traditional wired and wireless systems. It features a built-in MM phono equalizer, Bluetooth transmitter, aluminium die-cast platter, anti-skating adjustment and a high-density MDF cabinet. The turntable can transmit vinyl playback wirelessly to compatible Bluetooth speakers or headphones, while its switchable PHONO\/LINE output allows connection to conventional audio equipment.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual two-speed belt-drive turntable.\u003c\/li\u003e\n\u003cli\u003e33⅓ RPM and 45 RPM playback.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth transmitter for wireless playback.\u003c\/li\u003e\n\u003cli\u003eBuilt-in MM-compatible phono equalizer.\u003c\/li\u003e\n\u003cli\u003eSwitchable PHONO and LINE analogue output.\u003c\/li\u003e\n\u003cli\u003eAluminium die-cast platter with 30 cm diameter.\u003c\/li\u003e\n\u003cli\u003eStatic-balanced straight tonearm.\u003c\/li\u003e\n\u003cli\u003eAdjustable anti-skating mechanism.\u003c\/li\u003e\n\u003cli\u003eMM-type cartridge included.\u003c\/li\u003e\n\u003cli\u003eHigh-density MDF cabinet designed to reduce unwanted vibration and resonance.\u003c\/li\u003e\n\u003cli\u003eDust cover included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrive System\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive Method\u003c\/th\u003e\n\u003ctd\u003eBelt Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003eDC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlayback Speeds\u003c\/th\u003e\n\u003ctd\u003e33⅓ RPM \/ 45 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed Deviation\u003c\/th\u003e\n\u003ctd\u003e±2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWow \u0026amp; Flutter\u003c\/th\u003e\n\u003ctd\u003e0.2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e67 dB or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePlatter\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium Die-Cast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e30 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe aluminium die-cast platter provides a stable platform for record playback, while the belt-drive arrangement helps reduce motor-related vibration reaching the platter.\u003c\/p\u003e\n\u003ch3\u003eTonearm\u003c\/h3\u003e\n\u003cp\u003eThe TN-280BT-SE uses a \u003cstrong\u003estraight, static-balanced tonearm\u003c\/strong\u003e with an adjustable anti-skating mechanism. Its design provides straightforward cartridge setup and controlled stylus tracking.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStraight, Static-Balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffective Length\u003c\/th\u003e\n\u003ctd\u003e223 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStylus Pressure Range\u003c\/th\u003e\n\u003ctd\u003e0–5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Cartridge Weight\u003c\/th\u003e\n\u003ctd\u003e3.5–6.5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnti-Skating\u003c\/th\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIncluded MM Cartridge\u003c\/h3\u003e\n\u003cp\u003eThe TN-280BT-SE is supplied with a factory-installed \u003cstrong\u003eMM-type cartridge\u003c\/strong\u003e. The cartridge is designed to work with the turntable's integrated phono equalizer and can be replaced or upgraded with a compatible cartridge within the tonearm's specified weight range.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Type\u003c\/th\u003e\n\u003ctd\u003eMM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStylus\u003c\/th\u003e\n\u003ctd\u003eConical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e20 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Impedance\u003c\/th\u003e\n\u003ctd\u003e47 kOhms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Voltage\u003c\/th\u003e\n\u003ctd\u003e3.5 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking Force\u003c\/th\u003e\n\u003ctd\u003e3.5 ± 0.5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridge Weight\u003c\/th\u003e\n\u003ctd\u003eApprox. 5.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeadshell Weight\u003c\/th\u003e\n\u003ctd\u003e10 g including mounting hardware and wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eBluetooth Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe built-in \u003cstrong\u003eBluetooth transmitter\u003c\/strong\u003e allows the TN-280BT-SE to send the audio signal from a record directly to compatible Bluetooth speakers or headphones. This provides a wireless alternative to the analogue RCA connection.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBluetooth Function\u003c\/th\u003e\n\u003ctd\u003eTransmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBluetooth Version\u003c\/th\u003e\n\u003ctd\u003eBluetooth 4.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported Profile\u003c\/th\u003e\n\u003ctd\u003eA2DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported Codec\u003c\/th\u003e\n\u003ctd\u003eSBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApproximate Range\u003c\/th\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePhono Equalizer \u0026amp; Analogue Output\u003c\/h3\u003e\n\u003cp\u003eAn integrated \u003cstrong\u003eMM phono equalizer\u003c\/strong\u003e allows the turntable to connect to equipment with either a dedicated PHONO input or a standard line-level input. The output mode can be selected according to the connected amplifier or audio system.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePhono Equalizer\u003c\/th\u003e\n\u003ctd\u003eBuilt-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Modes\u003c\/th\u003e\n\u003ctd\u003ePHONO \/ LINE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eRCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePHONO Output\u003c\/th\u003e\n\u003ctd\u003e3.5 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLINE Output\u003c\/th\u003e\n\u003ctd\u003eApprox. 120 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eCabinet \u0026amp; Isolation\u003c\/h3\u003e\n\u003cp\u003eThe turntable uses a \u003cstrong\u003ehigh-density MDF cabinet\u003c\/strong\u003e designed to provide rigidity and help suppress unwanted resonance. The overall construction is intended to provide a stable platform for the platter, tonearm and cartridge.\u003c\/p\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Adapter Input\u003c\/th\u003e\n\u003ctd\u003e100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e12 V \/ 500 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption\u003c\/th\u003e\n\u003ctd\u003e2 W or less during operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandby Consumption\u003c\/th\u003e\n\u003ctd\u003e0.2 W or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e420 mm \/ 42 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e117 mm \/ 11.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e356 mm \/ 35.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × H × D)\u003c\/th\u003e\n\u003ctd\u003e420 × 117 × 356 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e4.9 kg\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFelt Mat\u003c\/li\u003e\n\u003cli\u003e45 RPM Adapter\u003c\/li\u003e\n\u003cli\u003eCounterweight\u003c\/li\u003e\n\u003cli\u003eHeadshell with MM Cartridge\u003c\/li\u003e\n\u003cli\u003eAluminium Die-Cast Platter\u003c\/li\u003e\n\u003cli\u003eDust Cover\u003c\/li\u003e\n\u003cli\u003eDust Cover Hinges\u003c\/li\u003e\n\u003cli\u003eAudio Cable\u003c\/li\u003e\n\u003cli\u003eAC Adapter\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TEAC","offers":[{"title":"Default Title","offer_id":44057608749174,"sku":null,"price":55254.24,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1451\/files\/1_10c78858-11e4-4450-a33a-fb31c72ccc89.webp?v=1787688758"}],"url":"https:\/\/www.therevolverclub.com\/collections\/teac.oembed","provider":"The Revolver Club","version":"1.0","type":"link"}