NAD - C338
₹ 51,000.00 was ₹ 72,900.00
This product is currently sold out.
About NAD-C 338
Getting the Basics Right
Built with NAD’s renowned music-first approach to audio architecture and amp design, the C 338 is equipped with the most advanced components commonly found in NAD’s class-leading line of amplifiers. Always starting with the details you can hear and advancing from there, NAD develops low-noise circuitry with the precision and stability to deliver incredible, near-zero distortion sound for the most difficult speakers.
HybridDigital™ Amp Technology
The search for a high-performance Class D solution led NAD to HybridDigital™, an innovative amplifier technology that uses a variable modulation frequency to bring out the life-like qualities of music, while reducing distortion under every operating condition. This highly optimized design gives phenomenal performance to the C 338 amplifier, both measured and subjective.
Efficient Class D Power
NAD has worked tirelessly to create the best performing Class D amplifiers that are energy efficient and produce beautiful sound—not heat—regardless of basic design principles. Using advanced measurements and data, NAD developed the C 338’s highly efficient power supply with a customised Hypex® UCD output stage to pump out 50 watts continuously and over 200 watts instantaneously to meet the demands of the most dynamic music. This new design is very linear over a wide bandwidth and provides consistent, noise-free performance for the amplifying stages with near perfect regulation of voltage.
Built-in Phono Stage for Vinyl Listening
Using a MM phono stage and an innovative low-noise circuit path, the C 338 can reproduce the warmth of LPs with accurate RIAA equalization and control the infrasonic noise that is in all recordings, without ever affecting the bass response.
Flexible Connectivity
With a wide array of connections, including a separate headphone amplifier that can drive high-impedance studio monitor headphones, the C 338 is ready for any type of listening. Line inputs can accommodate all kinds of analogue source components, offering ideal input impedance with linear ultra-low noise buffer amplifiers to preserve the musicality of recordings. Also connect a subwoofer with low impedance line outputs and extend the versatility of this budget-friendly, do-it-all amplifier.
Technical Specifications
- 50W x 2 Continuous Power into 8 or 4 Ohms
- 90W / 150W / 200W IHF Dynamic Power into 8 / 4 / 2 Ohms
- First hi-fi amplifier to feature Chromecast built-in
- Integrated Bluetooth® for added music streaming flexibility
- Built-in Phono Preamp for Turntables
- Stereo Line, Optical Digital and Coax Digital inputs
- NAD Remote App support for tablet and smartphone
- Dedicated Headphone Amplifier
- Subwoofer Output
Preamplifier
Line In, Subwoofer Out
- THD (20Hz-20kHz) - <0.005% at 2V out
- Signal/Noise Ratio - >106dB (IHF; A-weighted, 500mV out, unity gain)
- Input Impedance (R and C) - 56 kilohm + 100pF
- Maximum Input Signal ->4.5Vrms (ref. 0.1% THD)
- Output Impedance - Source Z + 200 Ohm
- Input Sensitivity 50mV (100Hz ref. 500mV out, Volume maximum
- Maximum voltage output – IHF load - >4.5V (ref. 0.1% THD)
Line In, Headphone Out
- THD (20Hz-20kHz) -- <0.005% at 1V out
- Signal/Noise Ratio - >105dB (IHF; A-weighted, 32 Ohm loads, ref. 2V out, unity gain)
- Frequency Response - ±0.3dB (20Hz-20kHz)
- Channel Separation - >56dB at 1kHz
- Output Impedance - 0.5 Ohm
Line In, Speaker Out
- Continuous Output Power into 4 Ohms and 8 Ohms (Stereo) - >50W (at rated THD, 20-20kHz, both channels driven)
- IHF Dynamic Power - 8 Ohm 80W / 4 Ohm 150W / 2 Ohm 210W
- THD (20Hz-20kHz) - <0.03% (250mW to 50W, 8 Ohm and 4 Ohm
- Signal/Noise Ratio - >98dB (A-weighted, 500mV input ref. 1W out in 8 Ohm)
- Clipping power - >60W (at 1kHz 0.1% THD)
- Peak output current - >18A (in 1 Ohm, 1 ms)
- Damping Factor - >300 (ref. 8 Ohm, 20Hz to 6.5kHz)
- Frequency Response - ±0.3 dB (20Hz-20kHz)
- Channel Separation - 1kHz >75dB / 10kHz >65dB
- Input Sensitivity (For 50W in 8 Ohm) - Line In: 380mV, Digital In: 18% FS
- Sample Rate - Up to 24 bit/192kHz
Phono In, Speaker Out
- THD (20Hz-20kHz) (Stereo) - <0.3% at 50W out
- Signal/Noise Ratio - >82dB (200 Ohm source, A-weighted, ref. 500mV out) / >76dB (MM cartridge source, IHF A-weighted, ref. 500mV out)
- Input Sensitivity - 4.1mV (ref. 50W 1kHz 4 Ohm out, Volume maximum)
- Frequency Response - ±0.3dB (20Hz-20kHz)
- Input Impedance - 47 kilohm + 100pF
- Maximum Input Signal - >80mVrms (ref. 0.1% THD)
Weight & Dimensions
- Gross Dimensions (W x H x D)* - 435 x 70 x 285mm (17 1/8 x 2 13/16 x 11 1/4)”
- Weight - 4.85kg (10.7lb)
