Monitor Audio Anthra W12 Active Subwoofer

₹ 199900.00 Sale

Anthra W12 Subwoofer

Engineered to deliver impressive bass in medium and large spaces, the Anthra W12 subwoofer features a formidable 1,000 Watt Class-D amplifier driving a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W12 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.

A full-colour LCD display and rotatory dial is located on the back panel, allowing for basic subwoofer setup and EQ preset selection. Advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.

Key Features

  • Powerful 1,000 Watt Class-D amplifier
  • 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver
  • Customizable DSP via the MaestroUnite app
  • Full-colour LCD display and rotatory dial for easy setup
  • Low-pass filter with adjustable roll-off (-3 to -48 dB/Oct)
  • Up to four subwoofers can be linked for an immersive audio experience
  • Universal mains input voltage (85-265VAC)
  • Cloth-covered, magnetically attached grille for sleek design

Technical Specifications

System Format Active - Sealed Cabinet
Drive Unit Complement 1x 12” (305 mm) High Linear-Excursion Triple Suspension Driver
Amplifier Classification High-Efficiency Class-D
Lower Frequency Limit -6dB @16Hz
Upper Frequency Limit (LPF Off) -6dB @400Hz
Driver Excursion (pk-pk) 50 mm
DSP 28 Bit 50 MIPS Configurable through MaestroUnite
Analogue Digital Conversion Autoranging Input (10Vrms max input)
Amplifier Output Power, 240Vac Instantaneous: 1700 W*
Continuous short-term: 900 W**
Amplifier Output Power, 120Vac Instantaneous: 1325 W
Continuous short-term: 700 W
LED UI Control Brightness, On-Off
Phase Control 0-360 Degrees measured at LPF Crossover
Low Pass Filter 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct
Custom EQ Configurable through MaestroUnite; 3 pre-defined EQ curves plus 3 custom EQ curves (8 band custom EQ supporting Peaking, High Shelf, Low Shelf, High Pass)
Volume Level Wide adjustable input gain to allow maximum output from a wide range of input signals
Inputs Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)
Mono/LFE Balanced XLR
Outputs Stereo unbalanced outputs with unbuffered throughput from RCA Inputs
Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input
Mains Input Voltage Universal Mains, 85-265VAC
External Dimensions (HxWxD) 374 x 374 x 374 mm
Power Consumption 200 W
Cabinet Construction Braced 25 mm thick MDF with 36mm front baffle
Grille Cloth covered magnetically attached Grilles
Weight 28.56 kg (63 lb 1 oz)
Go to full site