ADAM AUDIO T7V

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

If you're a music producer, singer/songwriter, rapper, beatboxer, instrumentalist or any other creator - Join Creators Club and get production gear provided to you at cost for life - Sign up for Creators Club

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Audio T10S subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

FEATURES & BENEFITS

PRODUCT FEATURE	BENEFIT TO THE CUSTOMER
U-ART 1.9” Accelerated Ribbon Tweeter	Allows longer operation with fewer signs of fatigue Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded U-ART membrane	Direct, fast response in the high-range even with complex transients
HPS waveguide from the S Series	Makes dispersion more consistent and imaging more stable over a wider area Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
Lightweight polypropylene construction of the woofer	Excellent transient response even at high sound levels without breakup of the diaphragm
Vertical 2-way system with 7” woofer	High resolution of the stereo image
Spacious rear-firing bass reflex port	Bass reproduction with very low compression
Linear frequency response of 39 Hz to 25 kHz	Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 1 m ≥ 110 dB	Powerful, compression-free sound reproduction even at very high sound levels
DSP-powered crossover design	Smooth frequency response without interferences between the drivers in the critical mid-range
Simple room acoustic adjustments via high- and low-shelf filters	Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog inputs over XLR and RCA	Optimized for balanced and unbalanced line signals
Acoustically optimized cabinet geometry	Reduction of unwanted reflections on the cabinets
Compact cabinet dimensions	Fits every desktop

TECHNICAL DATA

WOOFER

Number	1
Basket Ø	7" (178 mm)
Voice Coil Ø	1" (26 mm)
Cone Material	Polypropylene

TWEETER

Number	1
Type	U-ART
Diaphragm Area	4 inch² (2420 mm²)
Equiv. Diaphragm Ø	1.9" (48 mm)
Velocity Transform Ratio	4:1
Diaphragm Weight	0.17 g
Waveguide	HPS

BUILT-IN AMPLIFIERS

Number	2
Woofer	1
Type	PWM
Amp. Power RMS	50 W
Tweeter	1
Type	PWM
Amp. Power RMS	20 W

CONTROL OPTIONS

Input Sensitivity	-10 to +4 dB
Gain	Yes
High Shelf EQ > 5 kHz	- 2 dB, 0 dB, +2 dB
Low Shelf EQ < 300 Hz	- 2 dB, 0 dB, +2 dB

INPUT CONNECTORS

Analog	XLR / RCA
Input Impedance	10 kOhm / 20 kOhm

GENERAL DATA

Panel	Rear
Frequency Response	39 Hz - 25 kHz
THD > 80 Hz	0.5 %
Max. SPL per pair at 1 m	≥110 dB
Crossover Frequency	2.6 kHz
Max. Power Consumption	132 W
Weight	15.7 lbs (7.1 kg)
Height x Width x Depth	13.7" x 8.3" x 11.5” ( 347 mm x 210 mm x 293 mm)

Recently viewed

Your Cart