PMA-1700NE

2 Ch. 140W integrated Amplifier with USB-DAC

Featuring advanced ultra-high current single push-pull circuit power, Advanced AL32 Processing, and MM/MC phono equalizer, the Denon PMA-1700NE integrated amplifier delivers extraordinary sound quality with precise detail.

Stereo amplifier
70W per channel (8 ohms)
AL32 Processing
USB-DAC
Precise electrical controls
MM/MC phono

Technical Specifications :

Unit (W x D x H)	434 x 410 x 135mm 17.1 x 16.1 x 5.3in
Cabinet Size (W x D x H)	434 x 374 x 135mm 17.1 x 14.7 x 5.3in
Net weight	17.6kg 38.8lb
Packaging Dimensions (W x D x H)	548 x 520 x 249mm 21.6 x 20.5 x 9.8in
Packaging gross weight	20.4kg 45lb
Carton Color	2 Color
Cushion / Packing	4 Separate / Sheet
Panel Color	SP / BK
Front (Center) Panel	Aluminum
Side cover	SECC with 4 straight emboss
Side screw	SP: Nickel / BK: Black
Rear Panel	SECC t1.0mm
Chassis Material	SECC t1.2mm
Bottom Layer	Single
Volume Knob	Aluminum
Input Selector	Aluminum
Bass/Treble/Balance/ Phono Sel knobs	Aluminum
Power button	Aluminum
Other knob/button (LOUDNESS, SOURCE DIRECT etc)	Mold (Source Direct,Analog Mode,MM/MC)
Foot	ABS resin with rigid rib w/Hot stamp (H : 20mm)
Heatsink for Power Amplifier	Extruded Aluminum
Rated Output Power	70W + 70W (8ohm,20Hz-20kHz,THD0.07%) 140W + 140W (4ohm, 1kHz, THD0.7%)
Speaker Impedance	A or B : 4 ~ 16ohm A + B : 8 ~ 16ohm
Frequency Response	5Hz - 100kHz (0~ -3dB)
Total Harmonic Distortion	0.01 % (Rated output: –3 dB), 8 ohm/ohms, 1 kHz
Dumping Factor	100 and over
Input Sensitivity: Phono input	MM: 2.5 mV / 47 kohm MC: 200
RIAA Deviation	20 Hz - 20 kHz ±0.5 dB (MM/MC)
Phono Maximum Input	MM : 130mV / 1kHz MC : 10mV / 1kHz
Input Sensitivity: CD/LINE/RECORDER	125 mV / 19 kohm
Input Sensitivity: Power Amp input	0.85V / 47kohm (EXT. PRE)
Signal to Noise Ratio	PHONO (MM): (89dB) PHONO (MC): (74dB) CD: (107dB)
Tone Control	BASS : 100Hz ±8dB TREBLE : 10kHz ±8dB
Power Consumption	295W

Recently viewed

Your Cart