| Sale unit |
One turntable |
| TURNTABLE SECTION |
|
| Drive System |
Belt drive |
| Motor |
DC motor |
| Selectable Speeds |
33⅓ and 45 rpm |
| Motor Servo |
Speed rotation and servo system |
| Rotation Speed Varia |
+/-1% |
| Wow and Flutter |
0.10% |
| Signal-to-Noise Ratio |
-67 dB or higher (A-weighted) |
| Signal-to-Noise Ratio |
-60 dB or higher (unweighted) |
| Platter |
Aluminum die-cast |
| Platter Diameter |
12.0 in / 300 mm |
| Tonearm type |
Aluminium tube, static-balanced |
| Effective arm length |
8.8 in / 223.6 mm |
| Stylus pressure range |
0 to 4.0 g |
| Cartridge weight range |
3.5 to 6.0 g |
| Effective arm mass |
27.4 g |
| Overhang |
18.6 mm |
| Offset angle |
25 degrees |
| Anti-skating adjustment |
Supported |
| Tonearm main bearing |
Stainless steel |
| Cartridge type |
Audio-Technica AT91 moving magnet |
| Stylus construction |
Bonded diamond |
| Cartridge mount |
Half-inch |
| Cartridge frequency response |
20 Hz to 20 kHz |
| Channel separation |
>18 dB |
| Channel balance |
2.5 dB |
| Vertical tracking angle |
20 degrees |
| Stylus pressure |
2.0 g ±0.5 g |
| Cartridge weight |
5.0 g ±0.5 g |
| Headshell weight |
11.0 g including screws, nuts and wires |
| Phono equalizer amplifier type |
Moving magnet (MM) |
| Phono output |
2.5 mV (1 kHz, 3.54 cm/sec) |
| Line output |
140 mV (-17 dBV) |
| Phono / line |
Switchable |
| Supported load impedance |
47 kΩ |
| Connector |
RCA pin jack, including RCA cable accessories |
| Voltage |
100 to 240 V AC / 50 to 60 Hz |
| Power consumption |
1.5 W; less than 0.5 W at standby |
| Dimensions (published W × H × D) |
5.5 × 16.05 × 14.20 in |
| Weight |
12.10 lb |
