MX82
8 Channel Stereo Mixer
4 XLR, 4 RCA inputs
The MX82 is a 1RU stereo mixer that features four mic/line inputs and four stereo inputs.
Each of the four mic/line channels consists of a balanced XLR input switchable between mic and line level, 15dB of gain trim across the mic/line inputs plus individually switchable phantom power (15VDC). The first 4 channels also feature a line level direct output which can be used to feed additional amplifiers, mixers or recording devices.
An internal dip switch allows the first 4 inputs to be routed to the direct output, the master outputs or both. You can also feed the optional tone generator (AMTONE1) to the direct outs if required. Input 1 can also be pre or post master if you require, allowing it to be used as a priority (or emergency) input. Inputs 5-8 are four dedicated stereo RCA aux/line level inputs.
Specifications
Total Inputs 8
Frequency Response 20Hz - 20kHz
Input Channels 8 MIC or Line
THD+N < 0.1%
Output Channels 1 Stereo
Signal to Noise Ratio > 90dB
Mounting 1RU
Input Sensitivity MIC: 4.36mV / Line: 775mV / RCA: 200mV
Warranty 5 years
Input Voltage 230Vac 50Hz
Product Dimensions (W x D x H) 482mm x 182mm x 44mm Shipping Dimensions (W x D x H) 500mm x 267mm x 94mm
Net Weight 2.8 Kg
Shipping Weight 3.8 Kg
GTIN EAN 9323383011106
SLA 2104
4 channel power amplifier
SLA 3104 is a 4 channel, Class AB amplifier that delivers 600 watt / channel at 4 Ohm. Detailed specifications are given below
Highlights
- Soft start
- High SNR
- Low THD, IMD
- Heavy-duty power supply for high dynamic power
- Short-circuit, thermal, output DC, RF protection
- Variable-speed twin fan back-to-front cooling
- Twist-lock and binding post output connectors
- LED indicators for metering, status, and operating mode
- Variable sensitivity selector
Specifications
NO. OF CHANNELS 4
OUTPUT POWER PER CHANNEL
8Ω: 400W
4Ω: 600W
8Ω BRIDGED: 1200W
THD AT RATED POWER <1%
DAMPING FACTOR >300
SIGNAL TO NOISE RATIO (20HZ ~ 20KHZ) 105dB
OUTPUT CIRCUITRY AB
FREQUENCY RESPONSE 20Hz~20kHz, ±0.5dB
INPUT CONNECTORS EACH CHANNEL XLR with link
OUTPUT CONNECTORS EACH CHANNEL Twist-lock connector and binding post
AMPLIFIER AND LOAD PROTECTION Short circuit, output DC, thermal, RF protection
FRONT PANEL CONTROLS AND INDICATORS Clip, Protect and Signal LED indicators, 42 detent rotary vol control
REAR PANEL CONTROLS 3 position Slide switch for Mode - Dual, Mono, Bridge. 3 position Slide switch for Sensitivity – 0.775V, 1 V and 1.4V.
INPUT POWER (AS PER BIS IS616:2017 IEC60065:2014/IEC62368-1 900W
DIMENSIONS (WXHXD) MM 483 x 446 x 88
NET WEIGHT 18.6kg
AGENCY APPROVALS CE, BIS IS616:2017
NOTE: Due to continuous improvements, all specifications are subject to change
SSW 1030
on wall/ on floor subwoofer
The SSW 1030 is a high power subwoofer with operations in both mono and stereo mode. With inbuilt HPF, it can be operated in 8 Ohms and 4 Ohms mode
Highlights
- Wall mounted subwoofer
- In-built crossover for high pass to satellite speakers
- Both stereo and mono modes
- High SPL and power handling
- Transducer with dual voice coil
- Smooth, articulated response
Specifications
DESCRIPTION On Wall/ On Floor Subwoofer
TRANSDUCER COMPLEMENTS: LF 1 x 10" dual coil subwoofer
SPL @ RATED POWER 119 dB @ 300W
NOMINAL IMPEDANCE 4 Ohm + 4 Ohm
SENSITIVITY (1 W 1M) 95dB (half space)
FREQUENCY RESPONSE 45Hz ~ 180Hz (-3dB)
FREQUENCY RANGE 40Hz ~ 180Hz (-10dB)
POWER HANDLING DIRECT MODE 300W + 300W (direct, stereo)
COLOURS White/ Black
DIMENSIONS (HXWXD) MM 325 x 580 x 335
NET WEIGHT 16.5kg
MOUNTING OPTIONS Wall mounting brackets
NOTE: Due to continuous improvements, all specifications are subject to change
