Name: SVS 3000 Micro R|Evolution Subwoofer
Brand: SVS
Price: 155932.2 INR
Availability: InStock

SVS 3000 Micro R|Evolution Subwoofer

₹ 183,999.99

incl. 18% GST

Color

Product Description

Compact powered subwoofer with dual 9-inch drivers, 1,200W continuous amplification and app control. Available in Piano Gloss Black or White.

More Specifications

Sale unit	One powered subwoofer
Finish options	Piano Gloss Black; Piano Gloss White

Frequency Response / Acoustic Data

Frequency response	20–230 Hz, ±3 dB
Response measurement	2-metre ground-plane measurement, away from reflecting structures; quasi-anechoic
Low-frequency roll-off	Slope tuned to benefit from available room gain
Acoustic distortion comparison	Manufacturer reports 20–60% lower acoustic THD+N in the critical low-frequency band than the preceding generation
Response-chart scope	Frequency-response graph does not indicate maximum output capability

Subwoofer Specifications

Dimensions including grilles (H × W × D)	10.9 × 11.8 × 10.8 inches; 278 × 298.8 × 273.6 mm
Weight	22.5 lb / 10.2 kg
Packaged dimensions (H × W × D)	13.7 × 14.9 × 14.6 inches; 349 × 379 × 370 mm
Packaged weight	28.3 lb / 12.8 kg
Driver arrangement	Two opposing, side-firing, high-excursion 9-inch active drivers operating acoustically and electrically in parallel
Finishes	Piano Gloss Black; Piano Gloss White
Rear-panel control	OLED display and control interface; display-flip function
Grilles	Non-resonant steel mesh protects the drivers
Cabinet construction	Internally braced medium-density fibreboard (MDF), designed to suppress enclosure resonance at high drive levels
Feet	Screw-in Iso-elastomer feet for stability and reduced vibration-related noise

Driver Specifications

Driver system	Two opposing 9-inch long-throw drivers connected electrically and mechanically in parallel; force-balanced layout reduces cabinet vibration
Motor layout	Overhung motor arrangement tuned for controlled excursion
Excursion	Xmax: 27.3 mm; Xmech: 32.6 mm
Baskets	Custom 9-inch powder-coated steel frames; FEA-optimised for rigidity, heat transfer and mechanical damping
Cone and coupler	One-piece 1100 aluminium construction for stiffness, low moving mass and thermal conduction
Voice-coil winding	Four-layer, high-current copper winding; designed to limit distortion and power compression, dissipate heat and maintain magnetic control at high excursion
Former / bobbin	High-temperature 3003-H18 aluminium
Magnet system	Oversized Y30 ferrite motor with high magnetic flux density
Mechanical tolerances	Precision-machined motor and close-tolerance suspension components maintain control and linearity throughout excursion
Motor steel	Oversized low-carbon 08AL steel T-yoke and top plate; cooling and magnetic-circuit design support efficiency
Shorting ring	6063 aluminium; reduces gap induction and distortion while improving heat transfer and magnetic linearity
Surround	Proprietary injection-moulded NBR surround, designed for long excursion and controlled pistonic motion
Lead wires / spider	Two balanced, 24-strand, silver-plated high-temperature Litz leads woven through a 5-inch composite linear spider, linking amplifier and voice coil

Amplifier Specifications

Amplifier power	1,200 W continuous Class D; over 4,000 W peak
Power comparison	50% greater RMS power than the previous generation
Audio processor	295 MHz Analog Devices DSP; double-precision 56-bit filtering; more than five times the processing capability of previous SVS subwoofers
Real-time power management	DSP monitors power, driver excursion and current thousands of times per second, regulating voltage, headroom and current delivery to the voice coil
Digital audio processing	56-bit processing with premium DACs; signal-to-noise ratio exceeds 120 dB
Output stage	Discrete Class D; four 60 A / 200 V MOSFETs in full-bridge configuration; over 100 Vrms across the two drivers; designed for high efficiency and reduced EMI
Power supply	Digitally controlled switch-mode supply with a low-EMI resonant LLC topology and a regulated 160 V amplifier rail
AC monitoring	Input mains voltage and current are monitored digitally to adapt power-supply operation to line conditions
Amplifier distortion	THD+N below 0.05% at rated power; manufacturer reports a 70–90% reduction versus the preceding generation
System tuning	EQ and DSP-limiter settings tailored to the 3000 Micro R\|Evolution
RCA input	Unbalanced; 10 kΩ input impedance; consumer/professional source compatibility up to 4 Vrms
XLR input	Balanced; 18 kΩ input impedance; consumer/professional source compatibility up to 4 Vrms / +14 dBu
Local interface	OLED display and controls for the main operating settings
USB function	Supplies power to the optional SVS SoundPath Wireless Audio Adapter; adapter sold separately
Power / trigger modes	Auto, On and Trigger options through the app; 3.5 mm trigger input accepts 3–12 V AC/DC
IR input	3.5 mm input for integration with control systems
Standby consumption	0.5 W
Compliance	RoHS compliant; lead-free construction; worldwide safety certifications as stated by SVS

SVS App Specifications

Compatible platforms	Apple iOS, Google Android and Amazon Fire
DSP controls	Volume, adjustable low-pass filter, phase, polarity, six parametric EQs, room-gain compensation, power-management settings and additional functions
Presets	Three memory presets for saving system settings
Auto room equalisation	The manufacturer describes a function that will use the mobile device’s built-in microphone or an accessory microphone to measure room response and calculate equalisation filters at the listening position
Feedback	Bidirectional, real-time updates between app and subwoofer interface
Guidance	Built-in tutorial explains the available functions

Included Accessories

Feet	Isolating elastomer feet
Power cable	Heavy-duty, high-current, 6-foot cable
Documentation	Quick Start Guide

Official SVS product information